FAQ-Heli New Material Technology (Hejian City) Co., Ltd.
Current location：-
Wire Peeling and Cracking Caused by Unreasonable Die Angle
2026-05-02Wire Peeling and Cracking Caused by Unreasonable Die Angle Wire peeling and cracking during drawing are often directly related to an improper die angle design . The die angle controls how deformation is distributed in the...
MORE + -
Galling Problems and Elimination Methods of Alloy Drawing Dies
2026-05-02Galling Problems and Elimination Methods of Alloy Drawing Dies Galling is a severe surface failure phenomenon in alloy drawing dies, characterized by material adhesion, transfer, and surface tearing between the die and th...
MORE + -
How Alloy Drawing Die Defects Cause Wire Surface Scratches
2026-05-02How Alloy Drawing Die Defects Cause Wire Surface Scratches Wire surface scratches during drawing are often directly linked to defects in alloy drawing dies . These defects disturb smooth material flow, increase friction, ...
MORE + -
Solutions for Sudden Breakage of Drawing Dies During Wire Processing
2026-05-02Solutions for Sudden Breakage of Drawing Dies During Wire Processing Sudden breakage of drawing dies is a critical production failure that leads to unexpected downtime, product rejection, and potential equipment damage . ...
MORE + -
Improper Installation Causing Alloy Die Fracture and Solutions
2026-05-02Improper Installation Causing Alloy Die Fracture and Solutions Improper installation is one of the most overlooked causes of alloy drawing die fracture. Even when the die material and design are excellent, incorrect mount...
MORE + -
Fatigue Damage Mechanism of Long-Term Used Alloy Drawing Dies
2026-05-02Fatigue Damage Mechanism of Long-Term Used Alloy Drawing Dies Fatigue damage in long-term used alloy drawing dies is a progressive failure phenomenon caused by repeated cyclic stress, thermal fluctuation, and surface cont...
MORE +
