FAQ-Heli New Material Technology (Hejian City) Co., Ltd.
Current location：-
How to Avoid Edge Chipping and Breakage of Drawing Dies
2026-05-02How to Avoid Edge Chipping and Breakage of Drawing Dies Edge chipping and breakage of drawing dies are critical failure issues in wire production, especially under high load, high speed, and hard-wire processing condition...
MORE + -
Stress-Induced Cracking Problems of Alloy Drawing Dies in Production
2026-05-02Stress-Induced Cracking Problems of Alloy Drawing Dies in Production Stress-induced cracking in alloy drawing dies is one of the most critical failure modes in continuous wire production. It directly results in sudden die...
MORE + -
Crack and Split Difference Diagnosis of Carbide Drawing Dies
2026-05-02Crack and Split Difference Diagnosis of Carbide Drawing Dies In carbide drawing dies, both cracking and splitting are critical failure modes that can cause sudden downtime and severe production instability. Although they ...
MORE + -
Causes and Repair Solutions for Alloy Drawing Die Cracking
2026-05-02Causes and Repair Solutions for Alloy Drawing Die Cracking Alloy drawing die cracking is a serious failure mode that can lead to sudden downtime, product defects, and even complete die loss. Cracks typically originate fro...
MORE + -
Wear Difference Analysis of Alloy Dies for Different Metal Wire Drawing
2026-05-02Wear Difference Analysis of Alloy Dies for Different Metal Wire Drawing The wear behavior of alloy drawing dies varies significantly depending on the type of metal wire being processed. Differences in material hardness, d...
MORE + -
Maintenance Skills to Reduce Abrasive Wear of Drawing Dies
2026-05-02Maintenance Skills to Reduce Abrasive Wear of Drawing Dies Abrasive wear is one of the most common failure modes in alloy drawing dies, especially in continuous wire and rod production. It is mainly caused by hard particl...
MORE +
